FS-3820N KX DRIVER

Paper path error There is no paper cassette in the feeder, or the cassette is not inserted properly. Note the certain keys have the secondary function. Labels with spaces in between are apt to peel off, causing serious paper jam problems. The default number of print jobs that can be stored on the Microdrive is Thick Paper Fan the stack of paper and align the edges before loading them in the MP tray. Option The baud rate, data bits, stop bits, parity, and protocol for the serial interface can be set as follows: The factory default setting is A4 or Letter.

Uploader:	Kazil
Date Added:	15 December 2017
File Size:	70.42 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	93305
Price:	Free* [*Free Regsitration Required]

A CompactFlash Memory Card B-5 vii Contents Serial Interface Option When the value isthe toner container is full. After cleaning the inside of the printer see Cleaning on pagethe message will disappear when the GO key is pressed, and the printer will be ready for printing.

This value can be increased to up to 50 from the e-MPS Configuration menu. Note Chapter 4 Troubleshooting 4 This chapter explains how to handle printer problems that may occur. You can optionally download messages in order language.

Download Center

The specified file does not exist in the Microdrive. If these differ, a corresponding error message is displayed.

Each time the changes as shown below. These modes are selected when you choose on the printer driver through the application software: The baud rate can be selected from,default, and Up to three paper feeders can be attached to the bottom of the printer.

K the GO key to print onto one-side of the paper only.

Kyocera Mita shall not be liable for damage due to improper installation of the expansion memory. You may be required to produce a status page when requesting service to the printer.

The settings for other items can be changed in a similar manner. Try printing the status page again.

FSN Driver Download Center | ServiceWorld | KYOCERA Document Solutions

Also indicates when printing is automatically stopped due to occurrence of an error. The default setting is Enable. Description for the storage device. Deleting a Private Job To delete a stored private job, proceed as follows: The type identifying the written data, i. Processing appears, then Waiting. Note fs-3802n Pull out the charger unit approximately 5 cm 2 inches. Note that feeding the paper having a paper size which ds-3820n not match the current paper size from the MP tray can cause paper jam.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

Do not use envelopes that have an encapsulated liquid adhesive. The RSC protocols are also covered.

Support & Download

Microdrive Hard Disk Unit Enables the electronic sorting and job retention functions. The name assigned automatically by fa-3820n printer for written data.

The document in the mailbox is printed and automatically deleted from the mailbox.

In this menu, you can also set the type and pitch for Courier and Letter Gothic. Many envelopes have a diagonal grain orientation See Paper Grain on page Deleting a Stored Job To delete fs3-820n stored job, proceed as follows: The default setting is On. Use of paper in these conditions can lead to illegible printing, misfeeding, and paper jams, and can shorten the life of the printer.